|
Product Details:
|
| Type: | Stainless Steel Valves | Customized Support: | OEM\ODM |
|---|---|---|---|
| Port Size: | 1/2"-12" | End Connection: | Welding,Clamp End,Threaded,flange.etc |
| Body Material: | SS304/SS316L | Gasket: | EPDM、FPM、PTFE |
| Working Temperature Range: | -20℃—+135℃ | Max Working Pressure:: | 0.3 Bar(DN25),0.2 Bar(DN32/40),0.1 Bar(DN50 To DN100) |
| Operation Type: | Manual\Pneumatic\Electric | Application Scope:: | Dairy,food, Beverage, Pharmacy, Cosmetic, Chemical, Etc |
| Highlight: | Stainless Steel Non Return Check Valve,Hydraulic Non Return Check Valve,Ss304 Non Return Check Valve |
||
SS304 Non-Return Check Valve Stainless Steel Hydraulic Non-Return Valve
This describes a type of valve used to prevent backflow in hydraulic systems. Here are the details:
ss check valve Clamp End ss304 Stainless Steel Non Return Valve
| Product Name | ss check valve Clamp End ss304 Stainless Steel Non Return Valve | |
| Material | Product wetted steel parts | SS304 or SS316L |
| Other steel parts | SS304 | |
| Seal material | Standard | EPDM |
| Option | VMQ/FPM | |
| All seal materials comply with FDA 177.2600 | ||
| Temperature | Running working temperature |
VMQ:(-50~+180℃)EPDM:(-20~+135℃)FPM:(-30~+180℃) |
| Sterilization temperature | 150℃(Max 20min) | |
| Pressure | Open pressure | ≈0.2bar |
| Max working pressure | 10bar | |
| Surface treatment | Internal surface | Ra ≤ 0.8μm |
| External surface | Ra ≤ 1.6μm | |
| Connection | Connection standard | DIN,SMS,ISO,3A,RJT.IDF |
| Connection method:welded.threaded,clamped,flanged | ||
Specifications:
Applications:
•Stainless steel sanitary Non Return valve is designed for use in stainless steel pipe installations to prevent reverse flow.
Operating Principles:
• When the lower pressure of valve stem over the upper pressure and spring force,check valve opens.
• When the upper pressure equal to the lower pressure,check valve closes.
• A higher reverse pressure acts on the valve stem and causes valve to closes.
Standard Design
•Check valve has two parts jointed together by clamp and sealed with the special gasket.This series has welded,clamped and threaded type,suits for kinds of pipeline connection.
Technical Data
•If the check valves are installed in a vertical pipe, it needs approximately equal pressure 6Kpa to open.Maximum pressure for conveying material is 1000Kpa,Using temperature scope for -10℃~+135℃.
Contact Person: Ms. Pershing
Tel: +8615858821847
